Install-1.1-packages
Installation >> Install 1.1 >> Install 1.1 packages
Updating from Archivematica 1.0
If you have installed Archivematica 1.0.0 or 1.0.1 from packages, it is possible to update your installation without re-installing. The steps are:
Update Archivematica Storage Service
sudo apt-get update sudo apt-get install archivematica-storage-service
Update Archivematica
During the update process you will be asked about updating configuration files. Choose to accept the maintainers versions. You will also be asked about updating the database, say 'ok' to each of those steps. If you have set a password for the root mysql database user, enter it when prompted.
sudo apt-get install archivematica-mcp-server sudo apt-get install archivematica-mcp-client sudo apt-get install archivematica-dashboard
Update ElasticSearch
Archivematica 1.1.0 has been tested most extensively against version 0.90.13 of ElasticSearch. It is possible to use an older version (e.g. 0.20.6, which is what was distributed with Archivematica 1.0.0). Do not attempt to use ElasticSearch 1.0 or greater.
- Add the ElasticSearch apt repository next (from http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/setup-repositories.html):
sudo wget -O - http://packages.elasticsearch.org/GPG-KEY-elasticsearch | sudo apt-key add -
Then add this line to the bottom of /etc/apt/sources.list
deb http://packages.elasticsearch.org/elasticsearch/0.90/debian stable main
Now refresh your list of available packages and upgrade elasticsearch
sudo apt-get update sudo apt-get install elasticsearch
Restart Services
sudo service uwsgi restart sudo service nginx restart sudo /etc/init.d/apache2 restart sudo /etc/init.d/elasticsearch restart sudo /etc/init.d/gearman-job-server restart sudo restart archivematica-mcp-server sudo restart archivematica-mcp-client
Installing Archivematica 1.1 packages (new install)
Archivematica packages are hosted on Launchpad, in an Ubuntu PPA (Personal Package Archive). There are a number of Archivematica PPA's, the Archivematica 1.1 packages are currently hosted in the archivematica/daily ppa. In order to install software onto your Ubuntu 12.04.4 system from a PPA:
- Add the archivematica/release PPA to your list of trusted repositories (if add-apt-repositories is not available you must install python-software-properties first):
sudo apt-get update sudo apt-get install python-software-properties sudo add-apt-repository ppa:archivematica/daily sudo add-apt-repository ppa:archivematica/externals-dev
- Add the ElasticSearch apt repository next (from http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/setup-repositories.html):
sudo wget -O - http://packages.elasticsearch.org/GPG-KEY-elasticsearch | sudo apt-key add -
Then add this line to the bottom of /etc/apt/sources.list
deb http://packages.elasticsearch.org/elasticsearch/0.90/debian stable main
- Update your system to the most recent 12.04 release (12.04.4 is being tested with Archivematica 1.1 currently).
- This step will also fetch a list of the software from the ppa's you just added to your system.
sudo apt-get update sudo apt-get upgrade
- Install all packages (each of these packages can be installed seperately, if necessary). Say YES or OK to any prompts you get after entering the following into terminal:
sudo apt-get install archivematica-storage-service sudo apt-get install elasticsearch sudo apt-get install archivematica-mcp-server sudo apt-get install archivematica-mcp-client sudo apt-get install archivematica-dashboard
- Configure the dashboard and storage service
note:these steps are safe to do on a desktop, or a machine dedicated to Archivematica. They may not be advisable on an existing web server. Consult with your web server administrator if you are unsure.
sudo wget -q https://raw.github.com/artefactual/archivematica/1.0/src/vm-includes/share/apache.default -O /etc/apache2/sites-available/default sudo rm /etc/nginx/sites-enabled/default sudo ln -s /etc/nginx/sites-available/storage /etc/nginx/sites-enabled/storage sudo ln -s /etc/uwsgi/apps-available/storage.ini /etc/uwsgi/apps-enabled/storage.ini sudo service uwsgi restart sudo service nginx restart sudo /etc/init.d/apache2 restart sudo freshclam sudo /etc/init.d/clamav-daemon start sudo /etc/init.d/elasticsearch restart sudo /etc/init.d/gearman-job-server restart sudo start archivematica-mcp-server sudo start archivematica-mcp-client
- Test the storage service
The storage service runs as a separate web application from the Archivematica dashboard. Go to the following link in a web browser:
http://localhost:8000 (or use the ip address of the machine you have been installing on).
log in as user: test password: test
- Create a new administrative user in the Storage service
The storage service has its own set of users. In the User menu in the Administrative tab of the storage service, add at least one administrative user, and delete or modify the test user.
- Test the dashboard
you can login to the archivematica dashboard and finish the installation in a web browser: http://localhost
- Register your installation for full Format Policy Registry interoperability.
Using ICA-AtoM with Archivematica
If you are interested in using the ICA-Atom web-based content management and access system you can use the package within our PPA. Archivematica can upload digital objects to their associated descriptions in ICA-AtoM.
It is installed by running the following commands in your Terminal (answer yes to all prompts, it may require your mysql adminitration password if one was entered above):
sudo aptitude install ica-atom sudo aptitude install upload-qubit sudo /etc/init.d/apache2 restart sudo cp /var/www/atom/init/atom-worker.conf /etc/init/atom-worker.conf
You can finish your installation by visiting http://localhost/ica-atom/. For more information about ICA-AtoM installation see ICA-AtoM 1.3.1 installation.
Occasionally when loading the ica-atom web installer for the first time an error appears, refreshing your web browser usually resolves this. We intend to fix this in future version of the AtoM package.
After the AtoM installation, configure it to use the Sword plugin (in the Plugins menu) as well as the job scheduler (in Settings), then start the atom-worker:
sudo start atom-worker