Difference between revisions of "Virtual appliance instructions"

From Archivematica
Jump to navigation Jump to search
Line 24: Line 24:
 
*Archivematica uses the [http://en.wikipedia.org/wiki/Open_Virtualization_Format Open Virtualization Format] and has been tested with the free and open-source [http://www.sun.com/software/products/virtualbox/index.jsp Sun Virtual Box ] virtualization platform.  
 
*Archivematica uses the [http://en.wikipedia.org/wiki/Open_Virtualization_Format Open Virtualization Format] and has been tested with the free and open-source [http://www.sun.com/software/products/virtualbox/index.jsp Sun Virtual Box ] virtualization platform.  
 
*There are VirtualBox versions available for every major operating system.
 
*There are VirtualBox versions available for every major operating system.
**Download and install Sun VirtualBox: [http://dlc.sun.com/virtualbox/vboxdownload.html http://dlc.sun.com/virtualbox/vboxdownload.html].
+
**Download and install Sun VirtualBox: [http://dlc.sun.com/virtualbox/vboxdownload.html http://dlc.sun.com/virtualbox/vboxdownload.html]. Note that if you are installing VirtualBox on Windows you will have to click through a number of warnings that you are attempting to install non-verified software.
  
 
==Download Archivematica ==
 
==Download Archivematica ==

Revision as of 10:47, 21 April 2011

Main Page > Virtual appliance instructions


Archivematica is distributed as a virtual appliance which integrates a number of software tools into one common virtual machine environment.

This allows it to be run on almost any workstation or server hardware without compromising the host machine's operating system or application software. At the same time, the virtual appliance is able to interact with any number of networked and/or external storage devices to allow for the flexible implementation of an archival storage and backup strategy.


Minimum hardware requirements

  • Processor: Intel core 2 or AMD Opteron
  • Memory: 512MB for the virtual appliance ('guest') operating system, i.e: if the 'host' operating system has 2GB available, 512MB needs to allocated to the 'guest'. Depending on the operating system, machines with less than 1.5GB total memory will likely have trouble running Archivematica. Note that the default allocation setting in Archivematica is 512MB; however, the more that is allocated the better the system will run. The setting can be changed once Archivematica is running.
  • Hard Drive space: a minimum of 3GB to test the system on a small scale (i.e. use the available test files or import a small set of test files); 12GB or more for larger implementations

Instructions for using the VM image

Install Sun Virtual Box

  • Archivematica uses the Open Virtualization Format and has been tested with the free and open-source Sun Virtual Box virtualization platform.
  • There are VirtualBox versions available for every major operating system.
    • Download and install Sun VirtualBox: http://dlc.sun.com/virtualbox/vboxdownload.html. Note that if you are installing VirtualBox on Windows you will have to click through a number of warnings that you are attempting to install non-verified software.

Download Archivematica

  • Download the latest version of the Archivematica appliance.
  • Unzip the Archivematica file. This should result in the following two files appearing in an Archivematica folder:
    • Archivematica-0.x.ovf
    • disk0.vmdk

Start Archivematica virtual appliance

  • Open the Sun VirtualBox virtual machine.
  • Click File > Import Appliance
  • Click Choose
  • Select Archivematica-0.x.ovf
  • Click Open
  • Click Next
  • Click Import
  • Read and agree to the Software License Agreement (GPL2)
  • The virtual box will open with Archivematica 0.x listed on the left-hand side. Select Archivematica 0.x and click Start (the green arrow in the menu).
  • The image should launch, showing you a Linux Ubuntu desktop and some of the digital preservation applications which are included in Archivematica 0.x
    • You may have to log in using the user name demo and the password demo.
    • If your mouse pointer does not appear to be working in the virtual machine, click the letter f while holding down the right-hand control button. Do the same thing to switch back to using your mouse pointer outside the virtual box.
  • Congratulations, you have a running copy of Archivematica! See Documentation for instructions on how to use the software.

Fixing archivematica sources.list

The following commands entered in terminal will re-add the ubuntu repositories (makes repository software installable)

sudo -s
mv /etc/apt/sources.list /etc/apt/sources.list.backup
wget http://archivematica.org/downloads/sources.list  
mv ./sources.list /etc/apt/sources.list
aptitude update

Import files into virtual appliance (optional)

Using SFTP

  • While in virtualbox right click the archivematica virtualmachine and click settings
  • Click the 'Network' tab
  • 'Adapter 1' should be set to NAT by default(this allows you to get to the internet), click on 'Adapter 2' tab
  • Click enable adapter and set attached to 'host only adapter'
  • Power up the archivematica virtualmachine
  • Once in the xubuntu interface goto Applications > Accessories > Terminal
  • Type the following in terminal (the password is demo) - this will take a minute and requires internet
sudo aptitude install ssh 
  • type ifconfig in terminal you should see a IP address like '192.168.56.101' (likely eth1 interface)
$ ifconfig
eth1      Link encap:Ethernet  HWaddr fe:54:00:9d:92:64  
          inet addr:192.168.56.101  Bcast:192.168.56.255  Mask:255.255.255.0
          inet6 addr: fe80::1c6b:7bff:fe07:ddb6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:24 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1400 (1.4 KB)  TX bytes:5815 (5.8 KB)
  • From here your machine should be connectable via SFTP. Download a SFTP client, a popular opensource option is FileZilla, which works on Linux and Windows. If using OSX cyber duck is reported to be a decent opensource SFTP client.
  • the connection information should be as follows
username: demo
password: demo
IP/Hostname: 192.168.56.101 < results of ifconfig likely '192.168.56.*'
port: 22
destination folder:   /home/demo/ < if this is not set you will have to navigate to /home/demo directory 

Turn off virtual machine

  • At the end of your session, turn off the VirtualBox virtual machine by going to Machine > Close > and selecting one of the three shutdown options. It is best to choose either "Save the machine state" or "Send the shutdown signal". This is from the VirtualBox help manual:

3.4.3. Saving the state of the machine

When you click on the "Close" button of your virtual machine window (at the top right of the window, just like you would close any other window on your system) (or press the Host key together with "Q"), VirtualBox asks you whether you want to "save" or "power off" the VM.

The difference between these three options is crucial. They mean:

Save the machine state: With this option, VirtualBox "freezes" the virtual machine by completely saving its state to your local disk. When you later resume the VM (by again clicking the "Start" button in the VirtualBox main window), you will find that the VM continues exactly where it was left off. All your programs will still be open, and your computer resumes operation.

Saving the state of a virtual machine is thus in some ways similar to suspending a laptop computer (e.g. by closing its lid).

Send the shutdown signal. This will send an ACPI shutdown signal to the virtual machine, which has the same effect as if you had pressed the power button on a real computer. So long as a fairly modern operating system is installed and running in the VM, this should trigger a proper shutdown mechanism in the VM.

Power off the machine: With this option, VirtualBox also stops running the virtual machine, but without saving its state.

This is equivalent to pulling the power plug on a real computer without shutting it down properly. If you start the machine again after powering it off, your operating system will have to reboot completely and may begin a lengthy check of its (virtual) system disks.

As a result, this should not normally be done, since it can potentially cause data loss or an inconsistent state of the guest system on disk.

The "Discard" button in the main VirtualBox window discards a virtual machine's saved state. This has the same effect as powering it off, and the same warnings apply.