Difference between revisions of "Scalability testing"
Line 391: | Line 391: | ||
== Network setup == | == Network setup == | ||
+ | Unknowns: network saturation. | ||
+ | |||
+ | To gather seperatly: | ||
+ | Supported cpu instruction set (included in 'sudo cat /proc/cpuinfo'). | ||
+ | |||
+ | To gather at end of each test: | ||
+ | Dump and reset the database. Store the dump. | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 397: | Line 404: | ||
! Processor | ! Processor | ||
! Memory | ! Memory | ||
+ | ! Ram speed/timing | ||
! Disk/s Size | ! Disk/s Size | ||
+ | ! Shared directory disk write speed | ||
+ | ! Shared directory disk read speed | ||
! IP | ! IP | ||
! Filesystem | ! Filesystem | ||
! Services | ! Services | ||
+ | ! Network Connection Speed | ||
|- | |- | ||
| test01server | | test01server |
Revision as of 13:00, 18 April 2012
Main Page > Development roadmap > Scalability testing
Test File Sets
Test design
Maximums to test for:
- Max number of SIPS - 10
- Max number of files in SIP - 10,000
- Max size of individual file - 30 GiB
- Max size of SIP - 100 GiB
Baseline amounts:
- number of SIPS - 1
- number of files in SIP - 10
- size of individual file - 1 MiB
- size of SIP - 100 MiB
Test | No. of SIPs | No. of files in SIP | Max size of individual file | Max size of SIP |
---|---|---|---|---|
1. Baseline Test | 1 | 10 | 1 MiB | 100 MiB |
2. No. of SIPs | 10 | 10 | 1 MiB | 100 MiB |
3. No. of files | 1 | 10,000 | 1 MiB | 100 MiB |
4. Max file size | 1 | 10 | 30 GiB | 100 MiB |
5. Max SIP size | 1 | 10 | 1 MiB | 100 GiB |
... |
- Other tests: combination of maximums
CVA tests
System setup:
- Bare-metal install, 1 processor
- 2 cores
- 4GB ram 9 GB swap
- xubuntu
Note: excludes store AIP and upload DIP micro-services except where noted
Test date | No. transfers/SIPs | No. files | Total file size | Largest file size | AIP size | Total time | Comments |
---|---|---|---|---|---|---|---|
2011/11/10 | 1/1 | 1,000 | 12.1 GB | 60 MB |
| ||
2011/11/10 | 1/1 | 1 | 2.7 GB | 2.7 GB | Failed at prepareAIP due to max Bag size: | ||
2011/11/18 | 1/1 | 1,000 | 12.1 GB | 60 MB | 7.2 GB | 4 hrs 30 mins | Access normalization only |
2011/12/02 | 2/2 | 1,998 | 13 GB | 21 MB | Access normalization only | ||
2011/12/11 | 1/1 | 1,000 | 6.51 GB | 21 MB | 3.5 GB | Access normalization only | |
2011/12/11 | 2/2 | 1,996 | 13.8 GB | 27 MB | 7.2 GB | Access normalization only | |
2011/12/13 | 3/3 | 2,974 | 18.6 GB | 20 MB | 10.3 GB | 3 hrs 19 mins | Access normalization only |
2011/12/14 | 4/4 | 3,993 | 24.6 GB | 22 MB | 13.2 GB | 3 hrs 16 mins | Access normalization only |
2011/12/15 | 4/4 | 3,982 | 43 GB | 12 MB | 15 GB | 3 hrs 30 mins | Access normalization only |
2011/12/15 | 6/6 | 5,113 | 34.1 GB | 38 MB | 19.8 GB | 4 hrs 2 mins | Access normalization only |
2012/01/04 | 6/6 | 5,845 | 42.4 GB | 33 MB | 24 GB | 3 hrs 52 mins | Access normalization only |
2012/01/05 | 3/3 | 2,957 | 20.9 GB | 45 MB | 13.6 GB | 4 hrs | Access normalization only |
2012/01/05 | 6/6 | 5,947 | 33 GB | 52 MB | 19.2 GB | 4 hrs 47 mins | Access normalization only |
2012/01/12 | 6/6 | 4,847 | 38.5 GB | 58 MB | 23.2 GB | 4 hrs 43 mins | Access normalization only |
2012/01/13 | 6/6 | 5,912 | 101.6 GB | 175 MB | 63.8 GB | 8 hrs 53 mins | Access normalization only |
2012/01/17 | 1/1 | 1 | 1.4 GB | 1.4 GB | 0.6 GB | 25 mins | Access normalization only |
2012/01/17 | 5/5 | 23 | 19.7 GB | 2.1 GB | 19 GB | 4 hrs 1 min | Access normalization only |
2012/01/18 | 2/2 | 2 | 3.8 GB | 2.1 GB | 3.7 GB | 1 hr 11 mins | Access normalization only |
2012/01/20 | 6/6 | 14 | 6.1 GB | 1.3 GB | 5.9 GB | 48 mins | Access normalization only |
2012/02/07 | 5/5 | 5 | 56.7 GB | 25.4 GB | 55.5 GB | 4 hrs 51 mins | No normalization |
2012/02/08 | 5/5 | 10 | 124.4 GB | 23.8 GB | 122.2 GB | 8 hrs 21 mins | No normalization |
2012/02 | 1/1 | 1044 | 7.5 GB | 12.4 MB | 32.8 GB | >16 hrs | Normalization and access |
2012/02 | 1/1 | 104 | 611.6 MB | 7.1 MB | 2.58 GB | <2 hrs | Normalization and access |
2012/02 | 1/1 | 2125 | 47.1 GB | 35.9 MB | 46.2 GB | >24 hrs | Normalization and access |
2012/03 | 1/1 | 1654 | 7.9 GB | 11.7 MB | 37.7 GB | >16 hrs | Normalization and access |
2012/03 | 1/1 | 1195 | 5.7 GB | 9.9 MB | 26.8 GB | >12 hrs | Normalization and access |
2012/03/22 | 1/1 | 11.0 GB | 246.3 MB | GB | Normalization and access | ||
2012/03/22 | 1/1 | 6.7 GB | 9.7 MB | GB | Normalization and access | ||
2012/03/26 | 1/1 | 6.6 GB | 14.3 MB | GB | Normalization and access | ||
2012/03 | 1/1 | 18.1 GB | 11.7 MB | Normalization and access |
Multi-processor testing
Problem statement
- Does the amount of processing time decrease for each additional processing station added?
- If yes, by how much?
Constants and variables
Constants:
- Ram amount
- Ram speed
- Disk size
- Cpu frequency
Variables:
- Number of processors
- Number of transfer(s)
- Size of transfer(s)
- Number of files(s)
Ideal network for testing network consists of 6nodes+ each with dual core processor, 2GB+ memory, and 6GB+ disk space. Due to limited disk capacity, current tests are running with 5 nodes.
Testing data
- All testing data will be be preserved for analysis. Select data will be reported on this wiki.
Network setup
Unknowns: network saturation.
To gather seperatly: Supported cpu instruction set (included in 'sudo cat /proc/cpuinfo').
To gather at end of each test: Dump and reset the database. Store the dump.
HOSTNAME | Processor | Memory | Ram speed/timing | Disk/s Size | Shared directory disk write speed | Shared directory disk read speed | IP | Filesystem | Services | Network Connection Speed |
---|---|---|---|---|---|---|---|---|---|---|
test01server | 4x500mhz | 2048mb | 6GB+35GB | 10.10.0.1 | ext4 | MCPServer,MySQL,NFS,MCPClient | ||||
test01client01 | 2x500mhz | 1024mb | 6GB | 10.10.0.11 | ext4,NFS | MCPClient | ||||
test01client02 | 2x500mhz | 1024mb | 6GB | 10.10.0.12 | ext4,NFS | MCPClient | ||||
test01client03 | 2x500mhz | 1024mb | 6GB | 10.10.0.12 | ext4,NFS | MCPClient | ||||
test01client04 | 2x500mhz | 1024mb | 6GB | 10.10.0.14 | ext4,NFS | MCPClient |
Testing metrics
Our results are derived from running 000.zip through the archivematica pipe line, and then extracting MYSQL- timing views from the database. This gives us a clearer picture of productivity of clients.
To extract testing data, run the following on the command line(test0001.log being the output file name):
mysql MCP -e "select * from PDI_by_unit; select * from processingDurationInformation;" > test0001.log
you should get a file(test0001.log) containing something like:
SIP_OR_TRANSFER_UUID unitType Total time processing Number_of_tasks Average time per task total file size number of files count( DISTINCT FilesByUnit.fileUUID) average file size KB average file size MB time per task per MB currentLocation currentPath 032dc1ee-de1e-486b-b43e-d5602b4bc986 Transfer 838:59:59 4928 00:47:39 758373178 980 980 773.85018163 0.77385018 01:01:35 %sharedPath%watchedDirectories/SIPCreation/completedTransfers/000-88-032dc1ee-de1e-486b-b43e-d5602b4bc986/ NULL ca229fa8-073b-4bd3-980e-ced7e810c5d3 SIP 133:07:00 991 00:08:04 758373178 980 980 773.85018163 0.77385018 00:10:25 NULL %sharedPath%watchedDirectories/workFlowDecisions/createDip/000-88-ca229fa8-073b-4bd3-980e-ced7e810c5d3/ SIP_OR_TRANSFER_UUID client Time_spent_in_system Time_spent_processing Number_of_tasks currentLocation currentPath 09210bef-9053-44b4-8a95-e1a4022826eb server_1 00:00:01 00:00:01 1 NULL NULL 4c500821-6e7c-4bc2-8087-73b6e7002078 server_1 00:00:00 00:00:00 1 NULL NULL def33d3e-1bc8-4a14-ab5f-c06d3e2475a5 server_4 00:00:00 00:00:00 1 NULL NULL 032dc1ee-de1e-486b-b43e-d5602b4bc986 server_1 01:16:23 03:59:35 4928 %sharedPath%watchedDirectories/SIPCreation/completedTransfers/000-88-032dc1ee-de1e-486b-b43e-d5602b4bc986/ NULL ca229fa8-073b-4bd3-980e-ced7e810c5d3 client04_1 00:01:55 00:08:09 991 NULL %sharedPath%watchedDirectories/workFlowDecisions/createDip/000-88-ca229fa8-073b-4bd3-980e-ced7e810c5d3/