Difference between revisions of "Build a virtual appliance 0.7"

Revision as of 11:54, 8 October 2010

Main Page > Development > Build a virtual appliance

Below are instructions for building your own Archivematica virtual appliance. This allows you to create intermediate or branch releases to test and use your own modifications.

Requirements

Ubuntu server 10.04
vmbuilder requires KVM which requires a virt compatible processor however, you do not need virt support for vmbuilder
At least 2GB of ram

Software Requirements

subversion (SVN)

sudo apt-get install subversion

vmbuilder

sudo apt-get install ubuntu-vm-builder

A local apt-proxy. We recomend apt-cacher-ng.

sudo aptitude install apt-cacher-ng
sudo gedit /etc/apt-cacher-ng/acng.conf

change the port.. whatever its set to..(3142 defuault) to 9999 Restart the service for changes to take effect.

sudo /etc/init.d/apt-cacher-ng restart

Pre Build

1. check out the source

svn checkout http://archivematica.googlecode.com/svn/trunk/ archivematica-read-only

2. Run the build script: This script will set the vmbuilder execscript to archivematica.sh and create the selected type VM. Note the rootSize is the size of the vm disk to build in MB.

 
cd archivematica-read-only

Post Build

1. boot your virtual machine. For KVM its under ubuntu-kvm, for other examples please see Virtual_appliance_instructions.

kvm -m 528 -smp 1 -drive file=disk0.qcow2

2. From inside the machine open a terminal and run the post build script: This will create the necessary databases, and tables.

cd ~/postBuildScripts
./postBuildRun.sh

3. Open firefox and navigate to http://localhost, go through the qubit installer for the database settings all defaults will work.

4. Aside from some icon placement you now have a fully functional version of archivematica!

Create a .raw file

1. A raw file can be used to run the virtual appliance directly from a USB key or to install it directly on dedicated hardware without a virtualization layer.

2. after running vmbuilder you will be left with a qcow2 image. Run the following command:

kvm-img convert -f qcow2 -O raw disk0.qcow2 archivematica.raw

3. See Build a Live USB disk for instructions on using the .raw file to create a bootable USB key version of Archivematica

@@ Line 30: / Line 30: @@
 <pre>svn checkout http://archivematica.googlecode.com/svn/trunk/ archivematica-read-only</pre>
-. Modify archivematica-read-only/trunk/archivematica.cfg to resemble your file system  IE:
+. Run the build script:
-<pre> execscript = /home/demo/trunk/archivematica.sh </pre>
+This script will set the vmbuilder execscript to archivematica.sh and create the selected type VM.
-should be
+Note the rootSize is the size of the vm disk to build in MB.
-<pre> execscript = /home/yourhomefolder/archivematica-read-only/trunk/archivematica.sh </pre>
+<pre>
+cd archivematica-read-only
-. Build archivematica for your hosts virtualization platform. All the following commands will build the same virtual machine.. each for a different platform
-<pre>
-sudo vmbuilder vmserver ubuntu -c archivematica.cfg
-sudo vmbuilder xen ubuntu -c archivematica.cfg
-sudo vmbuilder kvm ubuntu -c archivematica.cfg
 </pre>
@@ Line 46: / Line 41: @@
 <pre>kvm -m 528 -smp 1 -drive file=disk0.qcow2 </pre>
-. From inside the machine open a terminal and run the following (password is demo)
+. From inside the machine open a terminal and run the post build script:
+This will create the necessary databases, and tables.
 <pre>
-incrontab /etc/incron.tab
+cd ~/postBuildScripts
-sudo mysqladmin create ica-atom
+./postBuildRun.sh
-sudo mysqladmin create dcb
-sudo mysqladmin create dashboard
-sudo chmod 444 .config/xfce4/panel/*
-sudo chmod 444 .config/xfce4/panel
 </pre>