Latest revision as of 13:23, 23 March 2017

Main Page > Development > Development Environment

Please note: Development environment instructions were for Archivematica 1.4 and earlier - these notes are no longer supported. Instead please see: Getting started

This page explains how you can configure and use a standard Linux system as an Archivematica development environment. The Archivematica development environment is available for developers that want the ability to customize or enhance their own Archivematica installation and/or contribute code back to the Archivematica project.

Setup[edit]

Install ubuntu 12.04
create a non-root user (with sudo privileges)
log in as your new non-root user
install archivematica storage service

sudo apt-get update
sudo apt-get install python-software-properties
sudo add-apt-repository ppa:archivematica/release
sudo add-apt-repository ppa:archivematica/externals
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install archivematica-storage-service
sudo rm /etc/nginx/sites-enabled/default
sudo ln -s /etc/nginx/sites-available/storage /etc/nginx/sites-enabled/storage
sudo ln -s /etc/uwsgi/apps-available/storage.ini /etc/uwsgi/apps-enabled/storage.ini
sudo service uwsgi restart
sudo service nginx restart

install git

sudo apt-get install git

Use git to checkout Archivematica code

git clone https://github.com/artefactual/archivematica.git

Run the install and helper scripts.
- ```
cd archivematica
```
- ```
./dev-installer
```
- Answer Y to all prompts.
- Restart the machine. (this is to enable the upstart services).
- ```
cd archivematica
```
- ```
./dev-helper
```
- Answer Y to all prompts.
- Complete AtoM setup
  - The database should already be created.
  - http://localhost/atom
  - https://www.qubit-toolkit.org/wiki/Installation#Open_Qubit.2C_ICA-AtoM.2C_or_DCB_in_your_web_browser
- Open the [dashboard http://localhost]

Configuring and Using Archivematica[edit]

These manuals contain information about the use and configuration of Archivematica:
https://www.archivematica.org/wiki/Administrator_manual
https://www.archivematica.org/wiki/User_Manual

Update[edit]

To pull down the latest code commits from the repository, and reset your dev install, navigate to the directory where Archivematica has been cloned:

Change Directory to the archivematica git directory.

cd ~/archivematica/

Check to see if you have any local changes that need to be stashed

git diff

If there are local changes please stash or commit them. (Or you won't be able to update).

git stash

Update...

```
./dev-helper
```
```
"Would you like to git pull?" (y/N) y
```

"Would you like to update/install package requirements?" (y/N)

```
"Would you like to recreate the databases?" (y/N) y
```
- Note: this command will remove any processing sips/transfers.

"Would you like to erase the ElasticSearch indexes?" (y/N)

```
"Would you like to clear transfer backlog and AIP storage?" (y/N) 
```
- Note: this command will delete all stored AIPs and stored backlogged transfers.

"Would you like to restart archivematica services?" (y/N) y

"Would you like to update sample data in /home/user/archivematica-sampledata?" (y/N)

"Would you like to export sample data from /home/user/archivematica-sampledata?" (y/N)

"Would you like to update AtoM and restart its atom-worker service?" (y/N) y

If you stashed changes, re-apply them with

git stash pop

Troubleshooting[edit]

If it stalls during update "Would you like to update/install package requirements?" (y/N)
- Stop the script with CTRL + C
- Try installing the item it failed on on the command line. Ie.
- ```
sudo apt-get install postfix
```
- Restart the dev-helper "Would you like to update/install package requirements?"

If you get this error error starting service:
- ```
sudo start archivematica-mcp-server
```
- ```
start: Unknown job: archivematica-mcp-server
```
- Reload the configuration Original answer and try again
- ```
sudo initctl reload-configuration
```
- Alternatively, reboot the machine.

If a SIP processing fails, it will move it to the 'failed' directory which is located:
- ```
/var/archivematica/sharedDirectory/watchedDirectories/failed
```

if ArchivematicaServer freezes

```
sudo restart archivematica-mcp-server
```
```
sudo restart archivematica-mcp-client
```

if ArchivematicaClient freezes (in terminal kill command)
- ```
sudo restart archivematica-mcp-client
```

Updates to the Dashboard may require an Apache webserver restart:
- ```
sudo /etc/init.d/apache2 restart
```

If you find a problem running the Dashboard and you want to get a detailed error log to report us, please switch it to debug mode following these instructions.

MCP is currently logging to the /tmp/directory
- /tmp/archivematicaMCPClient-HOST.log
- /tmp/archivematicaMCPServer-HOST-DATE.log
- /tmp/archivematicaMCPServerPID

@@ Line 1: / Line 1: @@
 [[Main Page]] > [[Development]] > Development Environment
-This page explains how you can configure an Ubuntu system to use as a basic Archivematica development environment.
+{| class="wikitable" style="background-color:#ffcccc; font-size: 120%; font-weight: bold; " cellpadding="10"
+| Please note: Development environment instructions were for Archivematica 1.4 and earlier - these notes are no longer supported. Instead please see: [[Getting started]]
+|}
-*Use [[Subversion]] to checkout Archivematica code
+This page explains how you can configure and use a standard Linux system as an Archivematica development environment.
-**If you have read-only access, use the public [http://code.google.com/p/archivematica/source/browse/trunk#trunk/includes/archivematica GoogleCode repository]
+The Archivematica development environment is available for developers that want the ability to customize or enhance their own Archivematica installation and/or [[contribute code]] back to the Archivematica project.
-<pre>svn checkout http://archivematica.googlecode.com/svn/trunk/ archivematica</pre>
-**If you have commit access, use the private repository
-*Run localDevsetup scripts. This will create links in your local Ubuntu environment to the relevant Archivematica scripts in your SVN checkout. This way you can make maintain the SVN checkout structure, make changes and commit those back to SVN repository, while also running Archivematica locally to test your changes and commits from other developers.
+=Setup=
-** /localDevSetup/*.sh
+*Install ubuntu 12.04
-** /localDevSetup/*.sh
+*create a non-root user (with sudo privileges)
-** /localDevSetup/*.sh
+*log in as your new non-root user
+*install archivematica storage service
+<pre>
+sudo apt-get update
+sudo apt-get install python-software-properties
+sudo add-apt-repository ppa:archivematica/release
+sudo add-apt-repository ppa:archivematica/externals
+sudo apt-get update
+sudo apt-get upgrade
+sudo apt-get install archivematica-storage-service
+sudo rm /etc/nginx/sites-enabled/default
+sudo ln -s /etc/nginx/sites-available/storage /etc/nginx/sites-enabled/storage
+sudo ln -s /etc/uwsgi/apps-available/storage.ini /etc/uwsgi/apps-enabled/storage.ini
+sudo service uwsgi restart
+sudo service nginx restart
+</pre>
+*install git
+<pre>sudo apt-get install git</pre>
+*Use git to checkout Archivematica code
+<pre>git clone https://github.com/artefactual/archivematica.git</pre>
+*Run the install and helper scripts.
+** <pre>cd archivematica</pre>
+** <pre>./dev-installer</pre>
+** Answer Y to all prompts.
+** Restart the machine. (this is to enable the upstart services).
+** <pre>cd archivematica</pre>
+** <pre>./dev-helper</pre>
+** Answer Y to all prompts.
+** Complete AtoM setup
+*** The database should already be created.
+*** http://localhost/atom
+*** https://www.qubit-toolkit.org/wiki/Installation#Open_Qubit.2C_ICA-AtoM.2C_or_DCB_in_your_web_browser
+** Open the [dashboard http://localhost]
+=Configuring and Using Archivematica=
+These manuals contain information about the use and configuration of Archivematica:
+<br/>https://www.archivematica.org/wiki/Administrator_manual
+<br/>https://www.archivematica.org/wiki/User_Manual
+=Update=
+To pull down the latest code commits from the repository, and reset your dev install, navigate to the directory where Archivematica has been cloned:
+*Change Directory to the archivematica git directory.
+<pre>cd ~/archivematica/</pre>
+*Check to see if you have any local changes that need to be stashed
+<pre>git diff</pre>
+*If there are local changes please stash or commit them. (Or you won't be able to update).
+<pre>git stash</pre>
+Update...
+*<pre>./dev-helper</pre>
+*<pre>"Would you like to git pull?" (y/N) y</pre>
+*<pre>"Would you like to update/install package requirements?" (y/N) </pre>
+*<pre>"Would you like to recreate the databases?" (y/N) y</pre>
+**Note: this command will remove any processing sips/transfers.
+*<pre>"Would you like to erase the ElasticSearch indexes?" (y/N) </pre>
+*<pre>"Would you like to clear transfer backlog and AIP storage?" (y/N) </pre>
+**Note: this command will delete all stored AIPs and stored backlogged transfers.
+*<pre>"Would you like to restart archivematica services?" (y/N) y</pre>
+*<pre>"Would you like to update sample data in /home/user/archivematica-sampledata?" (y/N) </pre>
+*<pre>"Would you like to export sample data from /home/user/archivematica-sampledata?" (y/N) </pre>
+*<pre>"Would you like to update AtoM and restart its atom-worker service?" (y/N) y</pre>
+If you stashed changes, re-apply them with
+<pre>git stash pop</pre>
+=Troubleshooting=
+* If it stalls during update "Would you like to update/install package requirements?" (y/N)
+** Stop the script with CTRL + C
+** Try installing the item it failed on on the command line. Ie.
+** <pre>sudo apt-get install postfix</pre>
+** Restart the dev-helper "Would you like to update/install package requirements?"
+* If you get this error error starting service:
+** <pre>sudo start archivematica-mcp-server</pre>
+** <pre>start: Unknown job: archivematica-mcp-server</pre>
+** Reload the configuration  [http://askubuntu.com/a/291644 Original answer] and try again
+** <pre>sudo initctl reload-configuration</pre>
+** Alternatively, reboot the machine.
+*If a SIP processing fails, it will move it to the 'failed' directory which is located:
+**<pre>/var/archivematica/sharedDirectory/watchedDirectories/failed</pre>
+*if ArchivematicaServer freezes
+**<pre>sudo restart archivematica-mcp-server</pre>
+**<pre>sudo restart archivematica-mcp-client</pre>
+*if ArchivematicaClient freezes (in terminal kill command)
+**<pre>sudo restart archivematica-mcp-client</pre>
+*Updates to the Dashboard may require an Apache webserver restart:
+**<pre>sudo /etc/init.d/apache2 restart</pre>
+*If you find a problem running the Dashboard and you want to get a detailed error log to report us, please switch it to debug mode following [http://archivematica.org/wiki/index.php?title=Dashboard#Debug_mode these instructions].
+*MCP is currently logging to the /tmp/directory
+** /tmp/archivematicaMCPClient-HOST.log
+** /tmp/archivematicaMCPServer-HOST-DATE.log
+** /tmp/archivematicaMCPServerPID
+[[Category:Deprecated]]

Difference between revisions of "Development environment"

Latest revision as of 13:23, 23 March 2017

Contents

Setup[edit]

Configuring and Using Archivematica[edit]

Update[edit]

Troubleshooting[edit]

Navigation menu

Search